Question: Will Command Hooks Hold Curtain Rod?

What is the strongest command hook?

Jumbo hooks allow you to hold up to 7.5 pounds.

Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more..

What is the heaviest weight a command hook can hold?

Command™ Hooks Weight LimitsHold up to 450 g. Even the lightest items need the right support. … Hold up to 1.3 kg. Comparing apples to oranges might not be a fair matchup, but comparing a bag of apples to your next project—that’s a different story. … Hold up to 2.2 kg. … Hold up to 3.6 kg.

How do you reinforce long curtain rods?

Simply place the Kwik-Hang brackets on the top of your window trim, tap them in, hang your curtains and move on to your next task. No screws, drills, holes or damage. Kwik-Hang brackets hold up to 20 pounds, and you can reinforce your curtain rod with a Kwik-Hang center bracket for added support.

How do you hang a curtain rod without drilling?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

Can you put up curtains with Command Strips?

Hanging curtains is as easy as 1-2-3 with Command™ Forever Classic Large Metal Hooks.

What is the proper height to hang curtains?

4-6 inchesDO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

How far should a curtain rod be from the wall?

The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame.

Why can’t I drill around my window?

You may be drilling too close to the corner of the drywall where it meets the window sill area. The drywall techs usually install a metal corner guard under the plaster and the bit you’re using isn’t for metal. … I’d suggest using a stud finder before drilling any holes in a wall.

How do you hang a curtain rod with command strips?

Mark on the wall with a pencil where you want to place the Command hooks. Place the Command hook against the wall where you want it to go, then trace the top, bottom, and side edges with a pencil. Place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame.

How much weight can command strips hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

How do I keep my curtain rod from sagging in the middle?

How to Fix a Sagging Curtain Rod1 – Move Your Support Brackets. … 2 – Add Additional Support Brackets. … 3 – Insert a Support Rod. … 4 – Use a Lighter Fabric. … 5 – Shorten the Curtain. … 6 – Protect the Curtain with a Barrier. … 7 – Purchase a Heavier Duty Curtain Rod. … 8 – Replace the Support Brackets.More items…•

Do curtain rods need center support?

Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.

Can I hang a heavy mirror with Command Strips?

Boards, mirrors and pictures can easily be wall mounted using 3M Command strips. … Items can be taken down and moved with no residue or damage to the wall surface.

Do magnetic curtain rods work?

Magnetic rods work best with light or sheer curtains. However, if you want to hang a curtain made from a heavier type of material, there are rods that come with more powerful magnets. The magnets that hold the curtain rods in place will only work on ferrous metals (metal containing iron).

How long do command strips last?

Leave for at least one hour before rehanging/reattaching. Q: How long will Command™ products stay up for? A: Command™ adhesive is designed to stay in place for as long as you need it to, and will stay put for many years.

Does adding more command strips hold more weight?

Can multiple command strips hold more weight? If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips.